Pro-Lam 1200HP 12 inch Commercial Roll/Mounting Laminator PLUS Stand
You Save: $1845
The Pro-Lam PL 1200HP 12 inch Roll Laminator is a high performance laminating - 1/4 inch capable mounting machine that is possibly the fastest 110v 12" laminator in existence. While producing superb finish and edge seal it is capable of speeds of 18 fpm range and will laminate 3 mil. material in excess of 10 fpm. It can use films from 1.2 to 15 mils thick and will laminate materials, such as foam board to 1/4" thick.
Many of these machines are currently in use today as single side laminators, utilizing nylon based films for book covers. This application is utilized by the rapidly expanding short-run publishing industry. Another common application is utilizing the PL-1200 as a short run fill in machine for trade laminators. In fact some have several, each loaded with different films. If a customer needs 1-100 of something laminated set up for a trade laminator can take far longer than actual run time. While tying up valuable high volume equipment. Remember, simply turn it on when you need--warm up time is about 4 minutes on this little guy.
Also remember that the vast majority of all printing, copying, and duplicating machinery does not process output that exceeds 12" in one dimension---and the vast majority of laminating films sold are less than 12" in width as well. This is a commercial grade machine in every way--it is simply designed to fill a specific niche in the laminating market.
With our Low Price Guaranty nobody saves you more money on quality laminating and binding products than Laminator.com.
Shop Online or Call Today!
Quality Assurance Guaranty!
|Units Per Parcel||1|
|Display In Special Offers||No|
|Adjustable Speed Control||Yes|
|Safety Auto Shutoff||No|
|Built-in Horizontal Trimmer||Yes|
|Feed Table Safety Switch||No|
|Moving Idler Bar||Yes|
|Min/Max Film Thickness||1 - 15 mil|
|Safety Shield Safety Switch||No|
|Speed Feet Per Minute||17|
|Shipping Weight||80 lbs|
|Mounting Thickness in Inches||1/4"|
|Machine Dimensions||18" x 28" x 20"|
- Laminating Width - 12"
- Speed - Max Mechanical Speed: 18fpm 1.5 CL, 30fpm @ 300 Degrees F - 3.0 CL 15-18fpm @250 Degrees F.
- Polypropylene Capable
- Laminates up to 10mil
- Side Slitters
- Mounts up to 1/4"
- 2 Cooling Fans
- Only 5 minute warm up time
- Holds 3000' of 1.5mil film
- Front Heat and Rear Pull Rollers
- Solid State Temperature Control w/Digital Readout
- Soild State Variable Motor Control
- 850 each 1700 combined Heated Roll Watts
- 120 Volt 60 Hz 16Amps/1900 Watts
- 23"W x 20"D x 40"H including stand
- Weight 55lbs
- Shipping Weight 82lbs
- Warranty 90 Day Parts
No packages Available.
No Videos Available.